Substation Commissioning Solutions

Successful substation commissioning depends on thorough, well-documented relay testing. VA-TEK provides the instruments, software, and technical expertise to streamline your commissioning workflow and deliver reliable results on schedule.

Commissioning Challenges

Modern substations are more complex than ever. Digital protection schemes, IEC 61850 process buses, and integrated automation systems demand test approaches that go beyond simple secondary injection. Key challenges include:

  • Tight project schedules with limited commissioning windows
  • Complex protection schemes with multiple IEDs
  • Mixed conventional and digital (process bus) architectures
  • Extensive documentation and client handover requirements
  • Coordination between protection, SCADA, and communications teams

VA-TEK Commissioning Approach

1. Pre-Commissioning Planning

We work with your project team to develop test plans aligned with the protection settings report and scheme logic diagrams. Pre-configured test templates for all relay types eliminate setup errors and reduce on-site time.

2. Automated Test Execution

VA-TEK Test Manager automates repetitive test sequences, including multi-parameter sweeps, timing tests, and harmonic response characterization. Automated testing improves consistency and frees your engineers to focus on results analysis.

3. Comprehensive Reporting

Professional reports with pass/fail criteria, measured values, and time-stamped records are generated automatically. Reports can be branded with your company logo and formatted to meet specific client requirements.

4. Handover Support

We provide complete documentation packages including test certificates, settings verification records, and as-tested configuration files for inclusion in project handover dossiers.

Test scope for a typical commissioning package

The table shows the tests that appear most often in substation commissioning scopes, the function they verify, and the instrument that performs them. Actual scope is set by the protection settings report and the client test specification.

Test What it verifies Typical signal range Instrument
CT/VT ratio, polarity and excitation Measurement chain is correctly wired and rated before protection is commissioned Secondary injection; knee point and burden VACTP200P
Overcurrent pickup and timing (50/51, 50N/51N) Settings match the coordination study across the curve Multi-point injection on the characteristic VAE-430
Differential stability and sensitivity (87, 87T, 87B, 87L) Relay restrains on through-fault and trips on internal fault Two- to six-channel current injection with phase shift VAE-660
Distance zones (21) Zone reach and time steps are correct for the line impedance Voltage/current pairs at zone boundaries VAE-660
Voltage, frequency and sync-check (27/59/81/25) Undervoltage, overvoltage and synchronising conditions Four-quadrant voltage, frequency ramp VAE-430 / VAE-660
Scheme logic, interlocks and trip circuits End-to-end behaviour from initiation to trip output Binary I/O, event timing VAE series
Transformer intake tests No transport damage before energisation Turns ratio, resistance, SFRA TTR-400, TWO-1100S, FRA100

Where the digital substation changes the plan

In a conventional or hybrid bay the relay still receives analog current and voltage, so secondary injection through the relay terminals remains the correct test method and proves the complete measurement chain. In a full process-bus bay the analog inputs are replaced by Sampled Values and the test set must publish SV and GOOSE, timestamp events and verify the network configuration. That is a different instrument class. If your scope includes full process-bus verification, tell us at the planning stage so the test plan can be split correctly between analog injection and IEC 61850 tools. Background: IEC 61850 testing and IEC 61850 substation testing.

Documentation you receive

  • Test plan aligned to the protection settings report, with per-relay test points and acceptance criteria.
  • Instrument configuration files and reusable test templates for repeat projects.
  • Executed test records with measured values, expected values and pass/fail status.
  • Time-stamped, signed reports in PDF, plus editable Word output where the client requires it.
  • Calibration certificates for every instrument used on site.

Practical constraints we design around

  • Short energisation windows. Test templates and pre-configured settings are prepared before mobilisation, so on-site time goes into execution rather than setup.
  • Mixed relay fleets. One test set covers all common protection types and brands; the test module library removes the need for brand-specific tools.
  • Multiple parallel crews. Compact, mains-powered units can be issued per crew without special transport.
  • Client-specific reporting. Report templates can carry your company identity and match the format the asset owner expects at handover.

Related technical reading

Request a quotation   Talk to an application engineer

💬