Solutions
VA-TEK provides testing programmes and field services across the power system lifecycle. Whether you are commissioning a new substation, managing an aging transformer fleet, or need additional test capacity during an outage, our application engineers can scope the work around the asset and the decision it has to support.
For industry-specific test objects — data center ATS and generator schemes, industrial plant feeders, renewable collector systems or panel builder FAT — start from Industry Applications.
Substation Commissioning
Complete relay test plans, automated test sequences, and documentation packages for transmission and distribution substation commissioning projects. We support both greenfield installations and brownfield retrofit programs with standardized or custom test templates.
- IED parameter verification
- Scheme logic and interlock testing
- End-to-end differential testing
- SCADA integration verification
Transformer Diagnostic Testing
Electrical diagnostic testing across the transformer lifecycle — from factory acceptance and post-transport verification through periodic maintenance and end-of-life assessment. Our instruments help you move from time-based maintenance to condition-based strategies, reducing unplanned outages and extending asset life.
- Turns ratio and winding resistance testing
- Sweep frequency response analysis (SFRA)
- Insulation resistance and power factor trending
- Fleet-wide test records and diagnostics
Field Service and Rental
Experienced field service engineers available for short-term assignments or long-term contracts. Instrument rental is also available for utilities and contractors that need additional test capacity during outage seasons.
- On-site test teams
- Instrument rental (weekly/monthly)
- Emergency call-out support
- Training and mentoring
Training & Education
Training-grade relay test sets and laboratory packages for technical universities, vocational training centres, and the in-house training departments of utilities and testing companies. The instruments use the same hardware platforms as the field units, configured for classroom use.
- Relay protection test sets for teaching
- Laboratory test packages
- Instructor training and materials
- Classroom and field configuration
Where each programme fits in the asset lifecycle
These programmes map onto different points in the life of a power system asset. Most projects touch more than one, so it is usually worth reading the row that matches your current stage rather than starting from the product list.
| Lifecycle stage | What you need to prove | Principal measurements | VA-TEK instruments |
|---|---|---|---|
| Commissioning | Protection operates correctly and is documented for handover | Pickup, timing, characteristic curves, scheme logic, CT/VT ratio and polarity | VAE-660, VAE-430, VACTP200P |
| Cable energisation | New or repaired cable insulation withstands service voltage | VLF withstand at 0.1 Hz, tan δ, leakage current trend | VLF-30 to VLF-90 family |
| Transformer intake and handover | Transformer arrived undamaged and matches factory baseline | Turns ratio, winding resistance, excitation current, SFRA signature | TTR-400, TWO-1100S, FRA100, TDC-3100 |
| Periodic maintenance | Protection settings and insulation condition are still as designed | Functional relay tests, insulation power factor, resistance trending | VAE series, TDC-3100, TWO-1100S |
| Post-fault investigation | Fault current path, relay operation and winding condition | Event records, SFRA comparison, turns ratio, resistance | FRA100, TTR-400, TWO-1100S |
How a VA-TEK solution is scoped
- Define the asset and the decision. We start from the equipment, its voltage class and the decision the test has to support — energise or not, hand over or not, run or repair. The standard and the test voltage follow from that, not from a catalogue page.
- Fix the test scope and acceptance criteria. You get a written scope: which tests, which standard, what quantity, what pass criterion, and which of our instruments covers it within its rated range.
- Configure the deliverables. Instrument configuration, software templates, test plans and the report format your client or asset owner will accept.
- Support the execution. Operator training, remote application support during the test window, and calibration documentation for the instruments used.
If a requirement falls outside what our equipment does, we say so in the scope. VA-TEK relay test sets are analog secondary-injection instruments; full process-bus testing with Sampled Values requires a dedicated IEC 61850 test set, which we do not currently supply. See our note on IEC 61850 testing for where secondary injection stops.
Industry applications
If your question is about the test object rather than the project, the Applications section maps each industry to the injection, pass criterion and model:
- Data centers — ATS/STS, generator protection, main-tie-main and UPS bypass.
- Industrial plants — motor feeders, incoming supply, cogeneration and process transformers.
- Renewable energy — interconnection, anti-islanding, collector feeders and BESS.
- Panel builders — protection panel FAT, trip circuits, interlocking and documentation.
Product families behind the solutions
- Relay protection test sets — VAE-660 (six-phase) and VAE-430 (three-phase) for secondary injection, scheme testing and fault simulation.
- Instrument transformer analysis — VACTP200P for CT/PT ratio, polarity, excitation and burden.
- Transformer diagnostics — TTR-400 turns ratio, TWO-1100S winding resistance, FRA100 SFRA, TDC-3100 tan δ and capacitance.
- VLF cable testing — the VLF 30–90 kV family, with tan δ options on VLF-34TD and VLF-45TD.
