CT Saturation Testing: Knee Point, Excitation Curve and Relay Stability
How to test CT saturation: measure the excitation curve and knee point, calculate the available secondary voltage, and confirm the relay remains stable for a close-in fault.
How to test CT saturation: measure the excitation curve and knee point, calculate the available secondary voltage, and confirm the relay remains stable for a close-in fault.
A busbar charging test procedure: energize the busbar with no load, verify 87B stability, check the CT circuits and check zone, and prove the trip matrix.
A 49 thermal overload test procedure: cold and hot curves, thermal memory, the time constant, cooling, pickup, and the alarm and trip outputs.
A 46 negative sequence test procedure: how to create 3I2 with one current, verify the pickup and inverse curve, and test the alarm and trip outputs for motor protection.
A 78 out-of-step test procedure: how to distinguish a stable from an unstable swing, set the trip angle, verify the separation logic, and prove the trip output.
How to test a 68 power swing blocking element: the slow impedance locus, inner and outer blinders, blocking timer, and the unblock decision for a stable or unstable swing.
A 51N/51G test procedure: residual versus core-balance connection, pickup, curve and time multiplier, high-set element, and coordination with the upstream relay.
How to prove Y-Delta-11 compensation in a transformer differential relay: six currents, the 30-degree shift, balance coefficients, and the balanced-load and internal-fault tests.
A 87T harmonic restraint test: how to generate the 2nd and 3rd harmonic components, find the blocking threshold, verify cross-blocking, and prove the trip time.
A 25 relay test procedure: two voltages, voltage and angle windows, slip frequency, dead-bus and live-bus logic, and the close pulse that commands the breaker.